Academic archive

Full academic archive

Emir Değirmenli demonstrating acoustic measurements with participants around a table at AHBV Turkish Music Days, 28 May 2024.
Emir Değirmenli explaining projected acoustic measurement graphs at METU Classical Guitar Days, 2018.

Academic archive

Full academic archive

Emir Değirmenli demonstrating acoustic measurements with participants around a table at AHBV Turkish Music Days, 28 May 2024.
Emir Değirmenli explaining projected acoustic measurement graphs at METU Classical Guitar Days, 2018.

Publications, research projects, presentations and teaching activities, grouped by their documented category.

Explore the archive

Publications & Books

Stages of a Chladni test: preparing the plate and equipment, placing the supports, excitation, formation of a visible nodal pattern, adjustment of the supports, and final frequency adjustment.

Book chapter · 2026-10 · Emir Değirmenli

Vibration and Acoustic Measurements in Stringed-Instrument Making: Tap-Tone, Chladni and FRF

A practical guide to setting up, applying and interpreting tap-tone, Chladni and frequency-response measurements in instrument-making workshops.

The three-stage cycle of instrument making supported by vibration and acoustic analysis.

Book chapter · 2026-09 · Emir Değirmenli

An Acoustic Approach to Stringed-Instrument Making: A Three-Stage Production Process

A framework for using vibration and acoustic measurements through material selection, construction and evaluation of the completed instrument.

Unsmoothed responses from 100–1000 Hz: Group A bridge and neck–pegbox mobility, Group B bridge mobility, and Group B acoustic FRF. Mobility is referenced to 1 m/(N·s), and acoustic response to 1 Pa/N. Shaded regions identify the three tracked resonance windows.

Article · 2026 · Journal of Turkish Organology · Emir Değirmenli

Effects of peg systems on structural vibration and acoustic response in an oud

An exploratory study of how changing the peg system affects one unstrung oud. The measurements do not establish tonal superiority under playing conditions.

Soundhole regions defined on the bağlama: (a) Performer-Side Soundhole (PSH), (b) Bottom Soundhole (BSH).

Article · 2026 · Turkish Studies · Emir Değirmenli

Acoustic Effects of a Performer-Side Soundhole in the Bağlama Bowl: A Comparative Investigation of Different Soundhole Configurations at Performer and Listener Positions

A comparison of bottom and performer-side soundhole configurations on one short-neck bağlama, measured at performer and listener positions.

Experimental rosette sets: (a) lightweight foam specimens for geometric comparisons, (b) specimens used for the connectivity/stiffness-proxy series, and (c) specimens used for the added-mass series.

Article · 2026 · RAST Musicology Journal · Emir Değirmenli

The acoustic role of rosette design in the oud: An experimental study of geometric and mechanical effects

An experimental study of interchangeable oud rosettes that examines opening geometry, added mass and structural connectivity on a single playable instrument.

(a) Traditional neck (TN), (b) experimental neck-1 (EN-1), and (c) experimental neck-2 (EN-2).

Article · 2024 · RAST Musicology Journal · Yunis Şahinkayası, Emir Değirmenli, Hamide Şahinkayası, Ünal Öztorun

Effects of hollowed neck designs on sound radiation and loudness of baglama

An experimental comparison of traditional and hollowed bağlama necks, combining sound-radiation measurements with listening and playability tests.

General view of the plectrum-striking mechanism (A) and the plectrum stroke (B).

Article · 2024 · RAST Musicology Journal · Furkan Karataş, Emir Değirmenli

The effects of plectrums made from different materials on the acoustic properties of the Tanbur

A controlled comparison of tanbur plectra made from different materials, using a mechanical striking system and acoustic analysis.

Listening-test results, reproduced in the paper from Değirmenli (2018, pp. 115–116).

Article · 2023 · idil · Emir Değirmenli

Examining Tonal Qualities in Stringed Instruments Utilizing Vibration and Sound Radiation Analyses: The Oud Example

An investigation of the relationship between measured vibration, sound radiation and perceived tonal qualities in ten ouds.

Chladni patterns of an oud soundboard. The original frequency labels are preserved from the scanned article.

Article · 2023 · Musikişinas · Emir Değirmenli

A Journey from Vibration to Sound: Musical Instrument Acoustics

An introductory article connecting the experience of sound with vibration, musical instruments and acoustic measurement, illustrated with examples from the oud.

Original cover of the English–Turkish / Turkish–English Dictionary of Acoustic Terms.

Dictionary contribution · 2022 · Hiperyayın

English–Turkish / Turkish–English Dictionary of Acoustic Terms

A contribution to a bilingual reference work for acoustic terminology.

Application of the sound-radiation measurement to the oud.

Article · 2017 · Gazi University Journal of Science, Part C · Emir Değirmenli

The Methods Used for the Acoustic Analysis of the Turkish Stringed Instruments

A comparison of impact-based sound-radiation measurements and long-term average spectra from played instruments, including the oud, tanbur and kanun.

Chladni-method measurement setup.

Article · 2017 · RAST Musicology Journal · Emir Değirmenli

Experimental Analysis of Vibration Measurement Techniques Used in Stringed Musical Instrument Making

A comparison of vibration-measurement methods on a spruce plate, with particular attention to techniques that can be used in an instrument-making workshop.

Conferences & Presentations

Title and abstract excerpt from this conference contribution.

Conference contribution · 2026-10-17 · Emir Değirmenli

From Geometric Copying to Acoustic Copying in Instrument Making: An Approach Based on Vibrational and Acoustic Properties

A conceptual and literature-based contribution on comparing an instrument’s dynamic and acoustic identity alongside its geometry.

Title and abstract excerpt from this conference contribution.

Conference contribution · 2025-12-09 · Emir Değirmenli

The role of human senses in instrument making: Traditional craftsmanship and modern acoustic analysis of string instruments

A conference abstract connecting traditional listening and touch with contemporary measurements of stringed instruments.

Title and abstract excerpt from this conference contribution.

Conference contribution · 2023-06-07 · Emir Değirmenli

Experimentation and Finite Element Analysis in Instrument Making: Designing a Makam-Based Xylophone

A contribution on combining finite element analysis with experimental work in the design of a xylophone for makam music.

Title and abstract excerpt from this conference contribution.

Conference contribution · 2022-05-27 · Emir Değirmenli

A Review of Vibration and Sound Analyses Used in Musical Instrument Acoustics

An overview of vibration and sound-analysis techniques, from material characterisation to the evaluation of a completed instrument.

Title and abstract excerpt from this conference contribution.

Conference contribution · 2022 · Emir Değirmenli

Investigation of Wood Based Composite Structures in Stringed Instrument Making: Double Top Soundboard Technique and Carbon Fiber Reinforced Brace Design

A symposium abstract outlining an investigation of wood-based composites, double-top soundboards and carbon-fibre-reinforced brace designs.

Free soundboard vibration shapes obtained by the finite element method (left) and the Chladni technique (right).

Conference contribution · 2019 · Emir Değirmenli

Modal Analysis of an Oud Using the Finite Element Method: Experimental Data in the Development of a Vibroacoustic Model

A study combining experimental modal measurements with a finite element model of the oud, including the enclosed air.

Comparison of sound-radiation, mobility and modal-analysis measurement results for the oud.

Conference contribution · 2019 · Emir Değirmenli

The Effects of the Body Vibration Modes of an Oud on Its Sound Production

A comparative investigation of the relation between body vibration and sound radiation in ten ouds.

Title and abstract excerpt from this conference contribution.

Conference contribution · 2017-12 · Emir Değirmenli

The Impact of Technological Advancements on Musical Instruments and Their Making Process

A conference abstract considering how developments in materials, manufacturing and measurement affect musical instruments.

Vibration-mode patterns and corresponding frequencies of the oud soundboard.

Conference contribution · 2015-07 · Emir Değirmenli

The Effects of Soundboard Vibrations on Timbre in Stringed Instruments: The Oud Example

An experimental contribution examining how changes to an oud soundboard’s vibration affect its spectrum and sound envelope.

Seminars & Workshops

Original poster for the Vibration, Sound and Music seminar.

Seminar · 2025-12-16 · Hacı Çelebi Döndü Beker Science and Art Centre

Vibration, Sound and Music

A seminar introducing the connections between vibration, sound and music.

Original official poster for the sixth International Violin-Making Workshop and Exhibition.

Seminar · 2025-02-07 · İKSEV and Dokuz Eylül University, İzmir

Seminar at the 6th International Violin-Making Workshop and Exhibition

A seminar contribution to the sixth International Violin-Making Workshop and Exhibition.

Original poster for the laboratory’s tenth-anniversary conference and workshop.

Workshop · 2024-05-28 · Ankara Hacı Bayram Veli University Turkish Music State Conservatory

Ten Years of the Musical Instrument Acoustics Laboratory

A conference and workshop marking ten years of the Musical Instrument Acoustics Laboratory.

Original seminar poster, cropped to remove the surrounding phone interface.

Seminar · 2024-05-07 · Anadolu University State Conservatory, Eskişehir

Instrument Statics: The Role of Statics in Instrument Design and Making

A seminar on the role of statics in designing and making musical instruments.

Original poster for the Design, Vibration and Sound seminar.

Seminar · 2024-01-03 · Anadolu University State Conservatory, Eskişehir

Design, Vibration and Sound: The Role of Acoustics in Instrument Making

A seminar connecting instrument design, vibration and sound through the role of acoustics in making.

Original poster for the Chladni-analysis workshop at the second Turkish Music Days.

Workshop · 2022-06-10 · Necmettin Erbakan University, Konya

Investigating Soundboard Vibration with Chladni Analysis

A workshop presentation using Chladni analysis to investigate soundboard vibration.

Original programme for the instrument-making workshop on shellac finishing and acoustic measurements.

Workshop · 2022-06-03 · Ankara Hacı Bayram Veli University Turkish Music State Conservatory

Shellac Finishing and Acoustic Measurement of Stringed Instruments

A workshop combining shellac finishing with vibration and acoustic measurement of stringed instruments.

Original poster for the TUMAC Instrument Making and Organology Workshop.

Talk · 2022-05-27 · TUMAC, online

Investigating Sound Production in the Bağlama through Vibration and Acoustic Analysis

A presentation on examining how the bağlama produces sound through vibration and acoustic analysis.

Original poster for the vibration and sound-analysis workshop at Anadolu University.

Workshop · 2019-05-28 · Anadolu University State Conservatory, Eskişehir

Vibration and Sound Analysis for Instrument-Making Workshops

A workshop on vibration and sound-analysis methods used in instrument making.

Original poster for the musical instrument acoustics workshop at Istanbul Technical University.

Workshop · 2019-05-03 · Istanbul Technical University Turkish Music State Conservatory

Vibration and Sound Analysis in Musical Instrument Acoustics

A two-day workshop on vibration and sound analysis for musical instrument acoustics.

Original programme poster for METU Classical Guitar Days.

Talk · 2018-05-05 · Middle East Technical University, Ankara

Vibration and Acoustic Analysis in Classical Guitar Making

A presentation on how vibration and acoustic analysis inform the classical-guitar making process.

Original poster for the Musical Instrument Acoustics Workshop at METU.

Workshop · 2018-03-03 · Middle East Technical University, Ankara

Musical Instrument Acoustics Workshop

An instrument-acoustics workshop at the thirteenth METU Turkish Music Days.

Original poster for the violin-making acoustics workshop.

Workshop · 2017-12-07 · Anadolu University State Conservatory, Eskişehir

Vibration and Acoustic Analysis in Violin Making

A practical workshop on applying vibration and acoustic measurements in violin making.

Original poster for the “From Makam to Instrument” masterclasses in Baku.

Talk · 2016-06-02 · Azerbaijan National Conservatory, Baku

From Makam to Instrument: Instrument Making

An instrument-making presentation in the “From Makam to Instrument” masterclass programme.

Original English-language poster for the Lisbon teaching programme.

Course · 2016-05-20 · Escola Superior de Música de Lisboa, Portugal

Acoustics of Turkish Stringed Instruments

Guest teaching on the acoustics and construction of Turkish stringed instruments in Lisbon.

The course title, cropped directly from the original training record.

Course · 2015-12-24 · Gazi University Turkish Music State Conservatory, Ankara

PULSE and Modal Analysis User Training

User training in the Brüel & Kjær PULSE system and modal-analysis software.

Original poster for the Turkish music programme in Beijing and Shanghai.

Workshop · 2013-11-21 · Beijing and Shanghai, China

Turkish Musical Instruments: Acoustics and Construction

Workshops introducing Turkish musical instruments through their physical properties, materials and construction.

Photograph of the original printed Physics of Musical Instruments poster.

Workshop · 2013-03-20 · Gazi University Turkish Music State Conservatory, Ankara

Physics of Musical Instruments: Strings, Winds and Percussion

A workshop on the physics of string, wind and percussion instruments.

Photograph of the original printed poster for the Cinuçen Tanrıkorur memorial event.

Workshop · 2011-01-05 · Afyon Kocatepe University State Conservatory

Oud-Making Workshop in Memory of Cinuçen Tanrıkorur

An oud-making contribution to the event held in memory of Cinuçen Tanrıkorur.

Photograph of an original printed poster for the Yorgo Bacanos Oud Festival.

Workshop · 2010-10-30 · Sepetçiler Kasrı, Istanbul

Oud-Making Workshop at the Yorgo Bacanos Oud Festival

An oud-making workshop within the Yorgo Bacanos Oud Festival.