Instrument Acoustics

Material calculators

Instrument Acoustics

Material calculators

Instrument Acoustics

Material calculators

Material calculators

Plate measurements

Measure the two sides and thickness of the free rectangular plate, then weigh it. Use the same x and y axes when entering its two bending frequencies.

Bending frequencies

Match each measured resonance to its pair of nodal lines. The sketches show Ly horizontally and Lx vertically.

Plate results

Density · d
—kg/m³
Dynamic modulus · Ex
—MPa
Dynamic modulus · Ey
—MPa
Modulus ratio · Ey/Ex
—
Specific modulus · Ey/d
—MJ/kg
Specific modulus · Ex/d
—MJ/kg
Equations and units

Density is the mass divided by the plate volume, d = m / (Lx × Ly × h).

Ex = d × Lx⁴ × Fx² / (1.05 × h²). Ey = d × Ly⁴ × Fy² / (1.05 × h²).

With lengths in metres, mass in kilograms and frequency in hertz, the moduli are in pascals. The displayed moduli are in MPa. Dividing a modulus in MPa by density in kg/m³ gives the displayed specific modulus in MJ/kg.

Worksheet by Emir Değirmenli. G. Caldersmith (1984), Vibration Theory and Wood Properties, JCAS 42.