Instrument Acoustics
Materials & Design

Instrument Acoustics
Materials & Design

Instrument Acoustics
Materials & Design

Materials & Design
Material properties, geometry and assembly are considered together, from a free component to the finished instrument.

Characterizing a piece of wood
Mass, dimensions, grain direction and resonant behaviour form a record of the actual piece. Comparing wood only by species leaves out differences within a species and the effect of geometry. The material stage feeds the decisions made during construction.
Following structural changes
The graduate work follows soundboard and bracing changes through vibration measurements. Peg mass is another example of a controlled structural change: the documented comparison uses one unstrung oud with specified peg conditions. It does not establish a universal tonal advantage for a particular peg system.
Finite element analysis
Numerical models can connect material properties, geometry and boundary conditions with predicted structural behaviour. My oud work compares modelling with experimental measurements and examines stages of construction. A model needs experimental checks; a simulated mode alone is not a listening result.
Material studies & observations


Originally shared 2026-06-19
Adjusting the Oud as a Whole Structure
The soundboard is only one part of an instrument’s response. I also consider the bowl and other structural parts when adjusting the sound.


Originally shared 2025-09-14
Listening to Wood While Hand Planing
Wood pieces of the same size can sound different under the same hand plane. I am exploring whether these sounds may offer useful clues alongside conventional tap-tone tests.


Originally shared 2025-04-30
Violin Acoustic Analysis with an Ebony Bridge
Acoustic analysis of a violin with an ebony bridge.


Originally shared 2025-04-16
Measuring Resonance, Damping and Elastic Modulus
Measurements of resonance, damping, and elastic modulus in the musical acoustics laboratory.


Originally shared 2024-10-14
Selecting Wood for Oud Bridges
Classifying and selecting bridge woods for different oud projects according to their sound characteristics.


Originally shared 2024-08-06
Measuring Canadian Red Cedar Soundboards
Measurements of density and elasticity in Canadian red cedar soundboards.


Originally shared 2024-01-26
Measuring Soundboard Wood Elasticity
Measuring the elasticity and density of wood to inform soundboard thickness and brace design.


Originally shared 2023-12-18
Finite Element Modal Analysis
Finite element analysis used to study an instrument’s vibration patterns. The displayed motion is deliberately exaggerated to make the modes easier to see.


Originally shared 2023-09-26
Bağlama Modal Analysis in My PhD Research
In my PhD research, experimental and theoretical modal-analysis results for the bağlama were similar. This suggested that finite element analysis could help test new instrument designs.


Originally shared 2023-09-06
The Sound of a Cocobolo Rib
A cocobolo rib examined through its sound.


Originally shared 2023-08-16
Bowl Wood and Thickness in Oud Acoustics
I consider the bowl alongside the soundboard and bracing when shaping an oud’s sound. Wood selection and careful thickness adjustments are part of that work.


Originally shared 2022-09-28
Soundboard Wood Density and Young’s Modulus
Measuring density and Young’s modulus in wood selected for soundboards.


Originally shared 2022-04-01
Finite Element Analysis of an Oud Soundboard
Static structural analysis of an oud soundboard using the finite element method, examining deformation and stress under string loading at the bridge.


Originally shared 2021-05-16
Measuring Young’s Modulus of Soundboard Wood
Measuring Young’s modulus in wood plates intended for soundboards.


Originally shared 2020-02-13
Analysing Soundboard Wood
I combine hands-on bending and tap-tone tests with measurements of Young’s modulus using Chladni patterns when assessing soundboard wood. These methods help me document and compare what I learn through making.