Workshop
Bonding the Nomex Core

Workshop
Bonding the Nomex Core

Workshop
Bonding the Nomex Core

Originally shared 2026-06-06
Preparing and bonding the Nomex core of a double-top soundboard, from mixing and spreading the epoxy to vacuum pressing.
Bonding the Nomex Core
01. Precise Epoxy Mixing
Epoxy must be mixed in the correct ratio for proper bonding strength and long-term stability.
02. Spreading on Glass
The epoxy is spread as a thin, even film on glass, allowing the Nomex core to receive resin uniformly.
03. Nomex Placement and Resin Uptake
The Nomex is not coated directly. It is placed onto the thin epoxy film and absorbs only the necessary amount of resin.
04. Removing Excess Resin
Most of the epoxy remains on the glass surface. This helps keep the soundboard light while maintaining structural strength.
05. Soundboard Placement and Vacuum Bagging
The prepared Nomex core is placed onto the wooden soundboard and carefully positioned inside the vacuum bag.
06. Vacuum Pressing for 24 Hours
A slow-curing epoxy is used for bonding strength and long-term durability. The soundboard remains under vacuum for about 24 hours.
Photo Gallery
Film presentation is being prepared.
