Instrument Acoustics

Laboratory & Methods

Instrument Acoustics

Laboratory & Methods

Instrument Acoustics

Laboratory & Methods

Laboratory & Methods

Reproducible measurements depend on the question, the arrangement and a record of how the data were obtained.

Setting up a comparison

Define the support, excitation and measurement positions before comparing records. Note the instrument’s assembly and string condition, sensor direction and distance, recording settings and relevant environmental conditions. Repeat valid impacts rather than keeping a double hit or an overloaded recording.

Reading the measurements

A tap recording can be inspected as a waveform and a frequency spectrum. A frequency-response function relates a measured response to its measured force input; its units depend on the response sensor. Modal analysis uses measurements at defined positions to study the structure’s vibration patterns. These methods answer related but different questions.

The procedures, equipment and interpretation are described in Vibration and Acoustic Measurements in Stringed-Instrument Making.

Clarinet pilot measurements

The May 2024 record documents pilot comparisons of carbon-fibre and traditional wooden clarinets. The original post announces measurements and says that results are to follow. It does not provide a validated numerical result or a complete test protocol, so none is asserted here.

Calculation tools

References and further reading

The linked work pages preserve the original publications and their bibliographies. The academic archive is the place for the complete record of publications, projects, conferences and teaching activities.

Laboratory records & observations

Tap Tone and Sound Analysis
Tap Tone and Sound Analysis

Originally shared 2026-06-24

Tap Tone and Sound Analysis

For me, tap tone and laboratory measurement are connected ways of understanding how an instrument responds. The tools range from the hand and ear to an impact hammer and microphone.

Understanding an instrument begins with listening more carefully.
Understanding an instrument begins with listening more carefully.

Originally shared 2026-04-24

Listening and Measuring in the Acoustics Lab

A day of acoustic measurements, exploring how our instruments vibrate and how those responses relate to their sound.

From the journal
From the journal

Originally shared 2025-11-27

Measuring Oud Bridge Mobility

I measure an oud’s bridge mobility to examine how vibration is transferred from the strings into the instrument. The measurements help me study its frequency-dependent response.

Long-Term Sound Spectrum Analysis — source film still
Long-Term Sound Spectrum Analysis — source film still

Originally shared 2025-04-18

Long-Term Sound Spectrum Analysis

An example from a Long-Term Sound Spectrum Analysis at our Conservatory Instrument Acoustics Lab.

Vibration and acoustic analysis
Vibration and acoustic analysis

Originally shared 2024-11-29

Vibration and acoustic analysis

Vibration and acoustic analyses in our instrument acoustics laboratory, as part of a TÜBİTAK project conducted with Sakarya University State Conservatory.

Magnetic Thickness Gauge on top plate of Onnik oud
Magnetic Thickness Gauge on top plate of Onnik oud

Originally shared 2024-05-31

Measuring an Onnik Oud Soundboard

Using a magnetic thickness gauge on the soundboard of an Onnik oud.

Scenes from the laboratory before we delve into today’s lecture 😊
Scenes from the laboratory before we delve into today’s lecture 😊

Originally shared 2024-05-10

Before the Acoustics Lecture

A view of the instrument acoustics laboratory before a lecture.

Clarinet Pilot Measurements
Clarinet Pilot Measurements

Originally shared 2024-05-08

Clarinet Pilot Measurements

Pilot comparisons of carbon-fibre and traditional wooden clarinets, documented in the laboratory on 8 May 2024.

From the journal
From the journal

Originally shared 2024-04-05

Violin and Bağlama Acoustics

Exploring how violins and bağlamas produce sound with students in our Music and Instrument Acoustics Lab.

Carbon Fiber & Double Top
Carbon Fiber & Double Top

Originally shared 2023-12-06

Acoustic Analysis of a Carbon Fibre Oud

Acoustic analysis of a carbon fibre body and cedar double-top oud in Arabic C–C tuning.

Tap Tone’s tradition meets the innovation of today’s impact hammer and measurement microphone.
Tap Tone’s tradition meets the innovation of today’s impact hammer and measurement microphone.

Originally shared 2023-09-21

Tap Tone and Instrumented Measurement

Tap tone alongside measurements made with an impact hammer and microphone.

An automatic plucking mechanism
An automatic plucking mechanism

Originally shared 2022-10-18

An Automatic Plucking Mechanism

A work-in-progress mechanism developed with my master’s student Furkan Karataş for acoustic research on plucked instruments.

The musical acoustics laboratory
The musical acoustics laboratory

Originally shared 2022-02-24

The musical acoustics laboratory

A view from our musical acoustics laboratory.

Vibration and acoustic testing of an Arabic oud, which has a floating bridge
Vibration and acoustic testing of an Arabic oud, which has a floating bridge

Originally shared 2021-10-26

Acoustic Testing of a Floating-Bridge Oud

Vibration and acoustic testing of an Arabic oud with a floating bridge.

Scanning the oud in three dimensions — source film still
Scanning the oud in three dimensions — source film still

Originally shared 2020-01-16

Scanning the oud in three dimensions

Trying a 3D scanner on an oud to create a digital model for musical-instrument research.